-
AVTECH's 25' Light Tower w/Audio Extension Cable extends the cable length, and therefore the total mounting distance, of the Light Tower w/Audio from the host Room Alert 32W, 32E or 4E monitor. This cable is compatible with the Light Tower w/Audio ONLY. -
AVTECH's Air Flow 1 Sensor (NC) provides real-time recognition of air flow stoppage. This Air Flow 1 Sensor (NC) is normally closed and includes a mounting clip and clamp. Typical use is to monitor continuous air flow in an HVAC duct, under a raised floor, or near a fan on a rack cabinet or important server. This sensor is equivalent to Stego Air Flow Switch #01300.0. -
AVTECH's Smoke Sensor provides real-time recognition of smoke or fire and includes specially designed electronics that allow it to interface with Room Alert products as a switch sensor. Powered by one 9V Alkaline battery (included), this model has a bright 'escape' light and loud 'buzzer' that are triggered if the sensor is activated. -
AVTECH's Fuel Tank Level 1 (NC/NO) monitors the rise and fall of fuel or other harsh liquids in a container (i.e. typically a large tank). The float switch and control weight are composed of chemically-resistant polypropylene; the 16' cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low. Dimensions of the float switch are 6.1" H x 6.7" W. The control weight is 4" H x 2.25" W. The 16' attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" and a maximum of 50". Please see the Installation Note for more information. Product # RMA-FTL1-SEN -
AVTECH’s Water Tank Level 1 Sensor (NC) monitors the rise and fall of water in a container (i.e. typically a large tank). The float and control weight are composed of chemically-resistant polypropylene; the 16' cable is coated with rugged PVC. Because this sensor uses a dual-point switch and differential height between switch states, you can use just one sensor to monitor two levels... both high and low. Dimensions of the float switch are 5.1" H x 3.0" W. The control weight is 4" H x 2.25" W. The 16' attached cable with PVC coating has a protection rating of IP67 and NEMA 6. The switch state differential range is a minimum of 10" and a maximum of 50". Please see the Installation Note for more information. Product # RMA-WTL1-SEN -
AVTECH's Mini Uninterruptible Power Supply & Power Outage Sensor is a unique sensor/UPS combination that detects loss of main power while providing seamless battery backup. -
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patent-pending, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor any electric device. If the connected device draws more than 100W, the Active Power Sensor will detect this and show the current power status as 'Active'. Additionally, this sensor provides real-time temperature values from -40° to 185° Fahrenheit and/or -40° to 85° Celsius. Accuracy is within + / - 2 C degrees. -
AVTECH's Power Sensor provides real-time recognition of a power source going off or coming on at the outlet it is connected to. Common use is to monitor the power supply of a main, 3 phase, UPS or backup generator source. Want To Know If A Device Is Powered On? Consider: Active Power Sensor -
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patent-pending, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor any electric device. If the connected device draws more than 100W, the Active Power Sensor will detect this and show the current power status as 'Active'. Additionally, this sensor provides real-time temperature values from -40° to 185° Fahrenheit and/or -40° to 85° Celsius. Accuracy is within + / - 2 C degrees. -
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patent-pending, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor any electric device. If the connected device draws more than 100W, the Active Power Sensor will detect this and show the current power status as 'Active'. Additionally, this sensor provides real-time temperature values from -40° to 185° Fahrenheit and/or -40° to 85° Celsius. Accuracy is within + / - 2 C degrees.
-
Monitor temperature and active power status with AVTECH's Digital Active Power w/Temperature Sensor. This patent-pending, award winning sensor provides the real-time power status of any electric device by simply strapping it to any AC electrical cord. There is no need to unplug the device, modify the cord, or require an electrician to connect within a main panel, making it easier than ever to monitor any electric device. If the connected device draws more than 100W, the Active Power Sensor will detect this and show the current power status as 'Active'. Additionally, this sensor provides real-time temperature values from -40° to 185° Fahrenheit and/or -40° to 85° Celsius. Accuracy is within + / - 2 C degrees.
-
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Shielded Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'. -
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Shielded Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Shielded Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor fluid temperature with AVTECH's Digital Fluid Temperature Sensor. This sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. Accuracy is within +/- 2 C degrees. It's special sealed tube containing Propylene Glycol makes it an ideal sensor to monitor refrigerated items, tracking their temperature instead of the surrounding air temperature. AVTECH offers this sensor with cable lengths of 25', 50' and 100'. -
Monitor fluid temperature with AVTECH's Digital Fluid Temperature Sensor. This sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. Accuracy is within +/- 2 C degrees. It's special sealed tube containing Propylene Glycol makes it an ideal sensor to monitor refrigerated items, tracking their temperature instead of the surrounding air temperature. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor fluid temperature with AVTECH's Digital Fluid Temperature Sensor. This sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. Accuracy is within +/- 2 C degrees. It's special sealed tube containing Propylene Glycol makes it an ideal sensor to monitor refrigerated items, tracking their temperature instead of the surrounding air temperature. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor temperature with AVTECH's Digital Temperature Sensor. This digital temperature sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. AVTECH offers this sensor with cable lengths of 25', 50' and 100'. -
Monitor temperature with AVTECH's Digital Temperature Sensor. This digital temperature sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor temperature with AVTECH's Digital Temperature Sensor. This digital temperature sensor provides real-time temperature values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius when used with any Room Alert environment monitoring device. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
AVTECH's Flood Sensor with attached 8' sensor cable is activated by liquid (i.e. water, fluid, etc.) making contact with the attached Flood Sensor Cable of any length. Once liquid is detected the Flood Sensor triggers an alarm condition allowing the Room Alert hardware, Device ManageR software and/or other monitoring application to send out alerts and/or take automatic corrective action. -
AVTECH's Flood Sensor with attached 8' sensor cable is activated by liquid (i.e. water, fluid, etc.) making contact with the attached Flood Sensor Cable of any length. Once liquid is detected the Flood Sensor triggers an alarm condition allowing the Room Alert hardware, Device ManageR software and/or other monitoring application to send out alerts and/or take automatic corrective action. -
AVTECH's Flood Sensor with attached 8' sensor cable is activated by liquid (i.e. water, fluid, etc.) making contact with the attached Flood Sensor Cable of any length. Once liquid is detected the Flood Sensor triggers an alarm condition allowing the Room Alert hardware, Device ManageR software and/or other monitoring application to send out alerts and/or take automatic corrective action. -
AVTECH's Flood Sensor (Spot) provides real-time recognition of flood or water and includes specially designed electronics that allow it to interface with Room Alert products as a switch sensor. The flood detector is powered by a 9v Alkaline battery (included), this model triggers an alert if the sensor is activated. -
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'. -
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
Monitor temperature, humidity and heat index (feels like temperature) with AVTECH's Digital Temperature & Humidity Sensor. This sensor provides real-time temperature values from -40 to 185 degrees Fahrenheit and/or -40 to 85 degrees Celsius when used with any Room Alert environment monitoring device. Temperature accuracy is within + / - 2 C degrees. The humidity range is from 5% to 95% relative humidity (RH) non-condensing. Humidity accuracy is within +/- 4.5% RH at 5 to 59% RH and within +/- 6.5% RH at 60 to 95% RH. AVTECH offers this sensor with cable lengths of 25', 50' and 100'.
-
The Room Alert Flood Cable Extension is used to extend an existing Flood Sensor Cable configuration to your desired length. Connect the cable extension end to end up to 200' to complete your flood detection system.This product includes the extension only. A Flood Sensor with 50' Cable is required to use this product. -
The GSM Modem w/USB Connection allows you to send text message alerts over any GSM/GPRS/ EDGE network from AVTECH’s Device ManageR software (with Dial Out Plugin Bundle). This compact 3G/2G modem connects directly to Device ManageR’s host system by a USB 2.0 connector, which also provides power to the modem. It requires a SIM card (mini-SIM), which you may obtain from your cellular service provider. -
AVTECH's Light Tower & Relay Adapter is required to connect the Light Tower, Light Tower w/Audio or Relay Switch Sensor to AVTECH's Room Alert 32W, 32E, 12E or 3E. This adapter also includes a relay switch that can be used to turn on/off low voltage devices via the Room Alert web interface, Device ManageR or automatically in response to an alarm condition going in or out or an alert stage. -
AVTECH's Light Tower w/Audio is designed to connect to a Room Alert 32E, 12E, 4E or 3E and will enhance the alerting capabilities of any Room Alert, Axis camera or other application on the network. Light tower w/ audio provides visual and audible alerting when an issue or event occurs. Light Tower lights and audio alarms can be automatically turned on/off when sensors (go in or out of an alert condition) or Axis camera sensors are triggered. Alarm warning lights and audio can also be turned on/off manually through the Room Alert 32E, 12E, 4E or 3E's web interface, AVTECH's Device ManageR software, or via SNMP. -
AVTECH's Relay Switch Sensor allows low voltage devices to be turned on/off in response to an event going in or out of an alarm condition. The AVTECH Relay Switch Sensor can toggle up to 4 devices. It is compatible with AVTECH's Room Alert 32W, 32E, 12E or 3E environment monitors Via AVTECH's Light Tower & Relay Adapter (LTA). The Relay Switch Sensor is compatible with the Room Alert 4E via a direct connection.
