C3-100/200/400

IP-based Door Access Control Panel

Features

Over-current protection, over-voltage protection, and reversal protection for the power supply and all of the input and output terminals
Reliable network system of controllers using either TCP/IP or RS-485 Serial communication
Supports different Wiegand formats, and connects to ZK readers as well as HID, Mifare, and generic ID card readers
Connects with a variety of electric locks, sensors, exit buttons, alarm devices, and indicators
Can be integrated with other security systems such as CCTV, Intrusion Detection, Fire Alarm Release, and elevastor Control for total security system. Directly compatible with ZK’s biometric reader controllers.
Easy-to-use and intuitive programming with ZKAccess Software
System management by browser from client PC’s. No need to install software on each client
Programming of special logic between doors is set up with simple pull down menus. No special scripts or code is required.
Management software allows indication of real-time door status and remote commanding of door open/close state. Alarm conditions such as forced open and extended open alarms are reported.
Advanced access control capabilities are built into the hardware, including anti-passback, Dual and multi-Card Authentication, and Duress Mode.

Feature
Number of Doors Controlled	1 Door	2 Door	4 Door
Number of Readers Supported	2	4	4
Types of Readers Supported		26-bit Wiegand, others upon request
Number of Inputs	2 (Exit Device and Door Status, AUX)	6 (2 Exit Device, 2 Door Status, 2 AUX)	12 (4 Exit Device, 4 Door Status, 4 AUX)
Number of Outputs	2 (1-From C Relay for Lock and 1-Form C Relay for Aux Output)	4 (2-From C Relay for Lock and 2-Form C Relay for Aux Output)	8 (4-Form C Relay for Lock and 4-Form C Relay for Aux Output)
Card Holders Capacity		30,000
Log Events Capacity		100,000
Weight	7.4lbs (3.35kg)	7.5lbs (3.4kg)	7.8lbs (3.55kg)
Communication		TCP/IP, RS-485 and WiFi optional
Enclosure		Powder Coated Aluminium
Mounting		Wall Mount
Recommended Power Supply		12V DC, 1.5A
Dimensions (Bundle Only)		380mm(L)×80mm(W)×280mm(H)
Dimensions ( Board Only)	6.3in.×4.17in. (160mm×106mm)	6.3in.×4.17in. (160mm×106mm)	8.58in.×4.17in. (218mm×106mm)